4




Getting CWM recovery on MyPhone Agua Hail


Got your MyPhone Agua Hail rooted? If yes, why not proceed with flashing custom recovery to your device? Like any other android users like you who want to modify and tweak their android devices, it is absolutely necessary to get a custom recovery installed in your android device. Most developers create flashable zips of their mods to get it installed from a custom recovery since even complex mods turned easier to install with that. Talking about a custom recovery, the recovery which comes first to our minds is ClockworkMod or CWM due to its popularity.

myphone agua hail cwm
In this guide, we, Siong Esteban (MyPhone Agua Hail developer) and yours truly, will be providing the steps on how to flash ClockworkMod (CWM) recovery on your MyPhone Agua Hail.

Steps on how to flash CWM recovery on MyPhone Agua Hail


Disclaimer: Flash at your own risk. We, together with the developer, are not liable for any damage it may cause to your device. We are just trying to help you here.

Optional:

Flashing Custom Recovery (CWM) Guide

By Siong Esteban

For MTK MobileUncle Tools for flashing
Requirements:
Instructions:

1. Put the myphone_agua_hail_cwm.img to your SD Card (external).
2. Install MTK_Mobile_Uncle_Tools_2.9.5.apk.
3. Open/run MTK Mobile Uncle Tools.
4. Go to Recovery Update.
5. Then select myphone_agua_hail_cwm.img.
6. There will be pop ups, just choose Yes.
Note:
If myphone_agua_hail_cwm.img doesn't show on Recovery Update, rename it to "recovery", it should be like "recovery.img".
If doesn't work, try the instruction for Rashr - Flash Tool below.
  
For Rashr - Flash Tool
Requirements:

Instructions:

1. Put the myphone_agua_hail_cwm.img to your SD Card (external).
2. Install Rashr.apk
3. Open/run Rashr - Flash Tool
4. Press Flash Recovery
5. Then select myphone_agua_hail_cwm.img.
6. There will be pop ups, just choose the positive buttons (Yes, yes). 
Note: If myphone_agua_hail_cwm.img doesn't show on Recovery Update, rename it to "recovery", it should be like "recovery.img".
If doesn't work, try the instruction for MTK MobileUncle Tools

Done!



Enjoy your new recovery! It is recommended to immediately backup your ROM as soon as you have successfully flashed CWM recovery. Visit this link how to easily backup your MyPhone Agua Hail ROM using CWM recovery.



Post a Comment

  1. Hello. I need help for Agua Hail. When my friend is using it, it turned off and wont turn on.. The red light keeps on blinking everytime we tried to turn it on. Can that be a probable cause of overusage?

    ReplyDelete
    Replies
    1. Some reasons are overheating, the battery was unhealthy so try some replacement batteries and see if it boots. If the phone was really overused especially using it while charging, there must be something burned in the circuit board.

      Delete
    2. Hello .i need help for agua hail . i can't press the network mode .srsly i can't use my mobile data connection . its always on "E"

      Delete
  2. The link for recovery is disabled. Please fix this

    ReplyDelete

 
Top